Tuc at T-B-O-H.NET wrote: > I'm not sure I explained myself correctly......(And I don't > understand what your trying to accomplish above) > > The setup looks like this : > > TRANSIT1 TRANSIT2 > | | > |-E0/0 |-E1/0 > | | > ------------------------------------- > 3640 > ------------------------------------- > | | > |-E0/1 |-E1/1 > |--------BVI1-------------| > | | > |-FA0/24 |-FA0/24 > ---------- ------------ > 2924-1 2924-2 > --------- ------------ > |-FA0/15 > | > |-Netgear Ethernet Over Power Extender > > So its complaining that FA0/15 on 2924-1 is mismatched > to E0/0 on the 3640. Well, DUH, no fooling. I would think > the only things it cares about are 3640~E0/1&2924-1~FA0/24 > and 3640~E1/1&2924-2~FA0/24 since those are the only 2 places > that the Ciscos directly connect.
What is on the other end of the Netgear Ethernet Over Power Extender on Fa0/15 on 2924-1? Which device is complaining? 2924-1, the 3640, or both? -- Jay Hennigan - CCIE #7880 - Network Engineering - [EMAIL PROTECTED] Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
