Tuc at T-B-O-H.NET wrote: >>> The setup looks like this : >>> >>> TRANSIT1 TRANSIT2 >>> | | >>> |-E0/0 |-E1/0 >>> | | >>> ------------------------------------- >>> 3640 >>> ------------------------------------- >>> | | >>> |-E0/1 |-E1/1 >>> |--------BVI1-------------| >>> | | >>> |-FA0/24 |-FA0/24 >>> ---------- ------------ >>> 2924-1 2924-2 >>> --------- ------------ >>> |-FA0/15 >>> | >>> |-Netgear Ethernet Over Power Extender >>> >>> So its complaining that FA0/15 on 2924-1 is mismatched >>> to E0/0 on the 3640. Well, DUH, no fooling. I would think >>> the only things it cares about are 3640~E0/1&2924-1~FA0/24 >>> and 3640~E1/1&2924-2~FA0/24 since those are the only 2 places >>> that the Ciscos directly connect. >> What is on the other end of the Netgear Ethernet Over Power Extender on >> Fa0/15 on 2924-1? >> > The other end is a NetGear Ethernet Over Power Router > (WGX102, part of the WGXB102 kit) >> Which device is complaining? 2924-1, the 3640, or both? >> > 3640.......
Unless there is some type of bridging or leakage between TRANSIT1 and the Netgear kit, it sure looks like a very strange bug. E0/0 on the 3640 isn't in any way touching Fa0/15 on 2924-1 at layer 2. -- Jay Hennigan - CCIE #7880 - Network Engineering - [EMAIL PROTECTED] Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
