>
> Tuc at T-B-O-H.NET wrote:
>
> > I'm not sure I explained myself correctly......(And I don't
> > understand what your trying to accomplish above)
> >
> > The setup looks like this :
> >
> > TRANSIT1 TRANSIT2
> > | |
> > |-E0/0 |-E1/0
> > | |
> > -------------------------------------
> > 3640
> > -------------------------------------
> > | |
> > |-E0/1 |-E1/1
> > |--------BVI1-------------|
> > | |
> > |-FA0/24 |-FA0/24
> > ---------- ------------
> > 2924-1 2924-2
> > --------- ------------
> > |-FA0/15
> > |
> > |-Netgear Ethernet Over Power Extender
> >
> > So its complaining that FA0/15 on 2924-1 is mismatched
> > to E0/0 on the 3640. Well, DUH, no fooling. I would think
> > the only things it cares about are 3640~E0/1&2924-1~FA0/24
> > and 3640~E1/1&2924-2~FA0/24 since those are the only 2 places
> > that the Ciscos directly connect.
>
> What is on the other end of the Netgear Ethernet Over Power Extender on
> Fa0/15 on 2924-1?
>
The other end is a NetGear Ethernet Over Power Router
(WGX102, part of the WGXB102 kit)
>
> Which device is complaining? 2924-1, the 3640, or both?
>
3640.......
Thanks, Tuc
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
