Hey Guys, Im trying to set up a new AP. I have never really set one up myself from scratch. I have managed them, but they were always pre-configured by someone else, so please excuse my ignorance. I followed the docs from cisco and I am stuck. Basically I cant reach it from anywhere. This is connecting to a 3750G stack. I configured the port on the 3750 as a dot1q trunk port, easy enough. Same goes for the AP. Vlan1 isnt used in this scenario, we have other Vlans that are being used in this case. I have gone back and forth assigning the BVI ip addresses on the both vlan's, making each vlan the native vlan on the AP and the switch, allowed only the 2 vlans on the trunk port on the switch. Nothing is letting me access the AP via IP. Im pretty sure I have over looked something really simple but I just cant find it. Unfortunately all the other AP's I have are using vlan1 as the native vlan and the another vlan for Voip traffic. That is pretty much the only difference between my existing AP's and this new one im trying to set up oh and the existing ones are 1220's. I included the config of the new AP. Any help is greatly appreciated.
version 12.3 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ap ! enable secret 5 $1$/zGH$xzsRGAXFpaqMQdyblohgC. ! ip subnet-zero ! no aaa new-model dot11 vlan-name Voice vlan 200 ! dot11 ssid STL-MIA vlan 100 authentication open mbssid guest-mode ! dot11 ssid STL-VOiP vlan 200 authentication open mbssid guest-mode ! dot11 network-map power inline negotiation prestandard source ! username Cisco password 7 072C285F4D06 ! bridge irb ! interface Dot11Radio0 no ip address no ip route-cache ssid STL-MIA ssid STL-VOiP mbssid speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.100 encapsulation dot1Q 100 no ip route-cache bridge-group 100 bridge-group 100 subscriber-loop-control bridge-group 100 block-unknown-source no bridge-group 100 source-learning no bridge-group 100 unicast-flooding bridge-group 100 spanning-disabled ! interface Dot11Radio0.200 encapsulation dot1Q 200 native no ip route-cache bridge-group 200 bridge-group 200 subscriber-loop-control bridge-group 200 block-unknown-source no bridge-group 200 source-learning no bridge-group 200 unicast-flooding bridge-group 200 spanning-disabled ! interface FastEthernet0 no ip address no ip route-cache duplex auto speed auto hold-queue 160 in ! interface FastEthernet0.100 encapsulation dot1Q 100 no ip route-cache bridge-group 100 no bridge-group 100 source-learning bridge-group 100 spanning-disabled ! interface FastEthernet0.200 encapsulation dot1Q 200 native no ip route-cache bridge-group 200 no bridge-group 200 source-learning bridge-group 200 spanning-disabled ! interface BVI1 ip address 172.31.1.15 255.255.255.0 no ip route-cache ! ip default-gateway 172.31.1.1 ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag ! control-plane ! bridge 1 route ip ! ! line con 0 line vty 0 4 login local transport preferred telnet line vty 5 15 login local transport preferred telnet _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
