That sounds as good as anything else I have tried, will give it a shot and see what happens.
Thanks, Joel P -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Rathlev Sent: Monday, December 17, 2007 6:46 PM To: [email protected] Subject: Re: [c-nsp] AP-1242AG config On Mon, 2007-12-17 at 18:11 -0500, Joel P wrote: <snip> > ! > ip default-gateway 172.31.1.1 > ip http server > no ip http secure-server > ip http help-path > http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag > ! > control-plane > ! > bridge 1 route ip > ! <snip> Just a quick shot in the dark, but maybe you need the "bridge 100 route ip" and "bridge 200 route ip" commands to enable bridging these groups? Regards, Peter Rathlev _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
