Hi, On Fri, Jan 04, 2008 at 03:38:14PM +0800, Dracul wrote: > Has anyone tried to integrate a non-cisco product using the standard > dot1.qinto a cisco VLAN config?
The nice thing about standards is that this should "just work".
We've used this in a number of combination, and as long as you are aware
of the caveats:
- Cisco does not tag packets on the "native" VLAN
- lots of vendors do not think that per-vlan spanning-tree is a good thing
(so you'll need to use MST to handle loops aka redundant links)
it should work fine.
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [EMAIL PROTECTED]
fax: +49-89-35655025 [EMAIL PROTECTED]
pgpSVBoo1c6dP.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
