Gert Doering wrote: > Hi, > > On Fri, Jan 04, 2008 at 03:38:14PM +0800, Dracul wrote: >> Has anyone tried to integrate a non-cisco product using the standard >> dot1.qinto a cisco VLAN config? > > The nice thing about standards is that this should "just work". > > We've used this in a number of combination, and as long as you are aware > of the caveats: > > - Cisco does not tag packets on the "native" VLAN
Agreed, in looking over the config, but not seeing the previous HP config.. I would recommend not setting the native VLAN to anything that is in use.. VLAN 1 is default, and used for your Internet, and VLAN 100 is in use by your AMINO STB Tom Sands > - lots of vendors do not think that per-vlan spanning-tree is a good thing > (so you'll need to use MST to handle loops aka redundant links) > > it should work fine. > > gert > > > ------------------------------------------------------------------------ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ Confidentiality Notice: This e-mail message (including any attached or embedded documents) is intended for the exclusive and confidential use of the individual or entity to which this message is addressed, and unless otherwise expressly indicated, is confidential and privileged information of Rackspace Managed Hosting. Any dissemination, distribution or copying of the enclosed material is prohibited. If you receive this transmission in error, please notify us immediately by e-mail at [EMAIL PROTECTED], and delete the original message. Your cooperation is appreciated. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
