Mark Kent wrote: >>> Take a look at what the SDM says, with "show sdm prefer". If you're >>> running a "vlan only" template, all L3-traffic is process switched. It >>> that case you should change it to "default" or whatever suits your >>> needs. >>> > > show sdm prefer > The current template is "desktop default" template. > The selected template optimizes the resources in > the switch to support this level of features for > 8 routed interfaces and 1024 VLANs. > > number of unicast mac addresses: 6K > number of IPv4 IGMP groups + multicast routes: 1K > number of IPv4 unicast routes: 8K > number of directly-connected IPv4 hosts: 6K > number of indirect IPv4 routes: 2K > number of IPv4 policy based routing aces: 0 > number of IPv4/MAC qos aces: 0.5K > number of IPv4/MAC security aces: 1K > > We're not near any of these limits... but I'll scroll > through all the options and record the changes. > > Thanks, > -mark > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > Mark,
You would be surprised as to how close you really are in utilizing tcam space. A "show platform tcam utilization" may open your eyes. We have been battling this cpu issue for months and it does all come back to tcam hardware resources. Manolo _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
