Mike Louis wrote: > So this is a layer 2 switching vs layer 3 switching performance issue. Are > you running any policies or QOS on either switch? ACLs or anything other than > a vanilla routing/switching setup?
It can do ACL and L3 at line rate - unless you have a logging ACL, or exceeded the TCAM in some way. You should never see it use real CPU unless you're doing something that isn't supported in hardware. Try a "show platform tcam utilization". ~Seth _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
