On Fri, 18 Apr 2008, Jason Berenson wrote: > I'm going to be upgrading a couple of 7206VXR NPE-350's to G1's tomorrow > night. I'm testing right now with the latest IP plus software: > c7200-is-mz.124-19.bin. When I pop in a PA-MC-T3 the router promptly > crashes: > > 10:44:58 UTC Fri Oct 8 2004: Data Bus Error exception, CPU signal 10, > PC = 0x60 > 98AAA0 > > -------------------------------------------------------------------- > Possible software fault. Upon reccurence, please collect > crashinfo, "show tech" and contact Cisco Technical Support. > --------------------------------------------------------------------
You can try another version of code and see if that works better. If not, your best bet is to open a case with the TAC. Does the router crash when you insert any other port adapters? Does the router crash regardless of which slot/bus you put the PA-MC-T3 in? Is it a PA-MC-T3, or a PA-MC-T3+? jms _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/