Gary reminded me it was already on CCO: http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps6968/ps6350/product_bulletin_cisco_ios_software_gd_program_retirement.html
On Fri, Apr 18, 2008 at 03:12:53PM -0400, Jason Berenson wrote: > Rodney, > > I'm just going to try 12.3.22 (which is what we have running on an > NPE-350 with T3 and OC3 cards installed) to see if it's stable. If not > I'll try the other G1 I have sitting here. > > -Jason > > Rodney Dunn wrote: > >On Fri, Apr 18, 2008 at 02:57:42PM -0400, Jason Berenson wrote: > > > >>Rodney, > >> > >>When I say pop in, I mean the router is booted and I put the card in. > >>I've tried a hard reboot too, same results. It did generate a > >>crashinfo, once I get our contract renewed I can open a TAC case. > >> > > > >Do you have another G1 you could try? > > > >The decode appears to be where we are trying to read some information from > >the system controller over the PCI bus. I haven't dug deep in that code > >but that's what I see from a quick glance of the trace decode. > > > > > > > >>What do you mean by 12.4 will never be GD? > >> > > > >Can't elaborate at this point. Sorry. > > > > > > > >>-Jason > >> > >>Rodney Dunn wrote: > >> > >>>Elaborate what "pop in" means? > >>> > >>>OIR? > >>>Hard reboot with it installed? > >>> > >>> > >>>Did it generate a crashinfo? > >>> > >>>A TAC SR needs to be opened because it's a bug. > >>> > >>>Rodney > >>> > >>>PS. 12.4 will never be GD. That program is retired. > >>> > >>> > >>>On Fri, Apr 18, 2008 at 02:09:05PM -0400, Jason Berenson wrote: > >>> > >>> > >>>>Greetings, > >>>> > >>>>I'm going to be upgrading a couple of 7206VXR NPE-350's to G1's > >>>>tomorrow night. I'm testing right now with the latest IP plus > >>>>software: c7200-is-mz.124-19.bin. When I pop in a PA-MC-T3 the router > >>>>promptly crashes: > >>>> > >>>>Router# > >>>>*Oct 8 10:44:54.339: %OIR-6-INSCARD: Card inserted in slot 1, > >>>>interfaces admini > >>>>stratively shut down > >>>> > >>>>10:44:58 UTC Fri Oct 8 2004: Data Bus Error exception, CPU signal 10, > >>>>PC = 0x60 > >>>>98AAA0 > >>>> > >>>>-------------------------------------------------------------------- > >>>> Possible software fault. Upon reccurence, please collect > >>>> crashinfo, "show tech" and contact Cisco Technical Support. > >>>>-------------------------------------------------------------------- > >>>> > >>>>-Traceback= 0x6098AAA0 0x6097F064 0x6097F5B4 0x6097E664 0x60996DB8 > >>>>0x6084DF60 0x > >>>>6084DF44 > >>>> > >>>> > >>>>Should I be running a different version of 12.4 or maybe just stick > >>>>with 12.3 until 12.4 is GD? > >>>> > >>>>Thanks, > >>>>Jason > >>>>_______________________________________________ > >>>>cisco-nsp mailing list cisco-nsp@puck.nether.net > >>>>https://puck.nether.net/mailman/listinfo/cisco-nsp > >>>>archive at http://puck.nether.net/pipermail/cisco-nsp/ > >>>> > >>>> _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/