Andrew, It looks like it may be this G1. I'm testing another G1 with the T3 and OC3 card in it and it seems to be happy but it's running: :c7200-js-mz.123-4.T1.bin right now. I'm going to try c7200-is-mz.124-19.bin and see what happens.
-Jason Tolstykh, Andrew wrote: > Same issue with PID: PA-2FE-FX running on 12.4(19); crash dump on hard > boot. > Fixed by changing the image to 12.4(8d) - works like a charm. 12.4(17) > should also work fine. > > HTH, > Andrew > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Jason Berenson > Sent: Friday, April 18, 2008 1:52 PM > To: Justin M. Streiner > Cc: cisco-nsp@puck.nether.net > Subject: Re: [c-nsp] Cisco 7206VXR > > Justin, David, > > It crashes when I put the card in and keeps crashing on a reboot. I did > > get it to boot with 12.3.26. When I put the PA-MC-T3 card in at that > point it's ok but when I put the ATM OC3 card in it crashes. > > When I have this router configured with an NPE-400 and these two cards > it seems to work just fine. I'm about to throw these 7206's out the > window and watch them slam into the pavement 10 floors down. > > -Jason > > Justin M. Streiner wrote: > >> On Fri, 18 Apr 2008, Jason Berenson wrote: >> >> >> >>> I'm going to be upgrading a couple of 7206VXR NPE-350's to G1's >>> > tomorrow > >>> night. I'm testing right now with the latest IP plus software: >>> c7200-is-mz.124-19.bin. When I pop in a PA-MC-T3 the router promptly >>> crashes: >>> >>> 10:44:58 UTC Fri Oct 8 2004: Data Bus Error exception, CPU signal 10, >>> PC = 0x60 >>> 98AAA0 >>> >>> -------------------------------------------------------------------- >>> Possible software fault. Upon reccurence, please collect >>> crashinfo, "show tech" and contact Cisco Technical Support. >>> -------------------------------------------------------------------- >>> >>> >> You can try another version of code and see if that works better. If >> > not, > >> your best bet is to open a case with the TAC. >> >> Does the router crash when you insert any other port adapters? >> Does the router crash regardless of which slot/bus you put the >> > PA-MC-T3 > >> in? >> Is it a PA-MC-T3, or a PA-MC-T3+? >> >> jms >> _______________________________________________ >> cisco-nsp mailing list cisco-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
