Rodney, I'm just going to try 12.3.22 (which is what we have running on an NPE-350 with T3 and OC3 cards installed) to see if it's stable. If not I'll try the other G1 I have sitting here.
-Jason Rodney Dunn wrote: > On Fri, Apr 18, 2008 at 02:57:42PM -0400, Jason Berenson wrote: > >> Rodney, >> >> When I say pop in, I mean the router is booted and I put the card in. >> I've tried a hard reboot too, same results. It did generate a >> crashinfo, once I get our contract renewed I can open a TAC case. >> > > Do you have another G1 you could try? > > The decode appears to be where we are trying to read some information from > the system controller over the PCI bus. I haven't dug deep in that code > but that's what I see from a quick glance of the trace decode. > > > >> What do you mean by 12.4 will never be GD? >> > > Can't elaborate at this point. Sorry. > > > >> -Jason >> >> Rodney Dunn wrote: >> >>> Elaborate what "pop in" means? >>> >>> OIR? >>> Hard reboot with it installed? >>> >>> >>> Did it generate a crashinfo? >>> >>> A TAC SR needs to be opened because it's a bug. >>> >>> Rodney >>> >>> PS. 12.4 will never be GD. That program is retired. >>> >>> >>> On Fri, Apr 18, 2008 at 02:09:05PM -0400, Jason Berenson wrote: >>> >>> >>>> Greetings, >>>> >>>> I'm going to be upgrading a couple of 7206VXR NPE-350's to G1's tomorrow >>>> night. I'm testing right now with the latest IP plus software: >>>> c7200-is-mz.124-19.bin. When I pop in a PA-MC-T3 the router promptly >>>> crashes: >>>> >>>> Router# >>>> *Oct 8 10:44:54.339: %OIR-6-INSCARD: Card inserted in slot 1, >>>> interfaces admini >>>> stratively shut down >>>> >>>> 10:44:58 UTC Fri Oct 8 2004: Data Bus Error exception, CPU signal 10, >>>> PC = 0x60 >>>> 98AAA0 >>>> >>>> -------------------------------------------------------------------- >>>> Possible software fault. Upon reccurence, please collect >>>> crashinfo, "show tech" and contact Cisco Technical Support. >>>> -------------------------------------------------------------------- >>>> >>>> -Traceback= 0x6098AAA0 0x6097F064 0x6097F5B4 0x6097E664 0x60996DB8 >>>> 0x6084DF60 0x >>>> 6084DF44 >>>> >>>> >>>> Should I be running a different version of 12.4 or maybe just stick with >>>> 12.3 until 12.4 is GD? >>>> >>>> Thanks, >>>> Jason >>>> _______________________________________________ >>>> cisco-nsp mailing list cisco-nsp@puck.nether.net >>>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >>>> >>>> _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/