Thanks for the link. Just to clarify, I didn't think he was "lying" to me, which is pretty harsh. I simply wanted a document stating what you've quoted, which he did not provide. Do you always believe everything your SE tells you? :-)
Thanks, On Fri, Aug 29, 2008 at 12:04 AM, <[EMAIL PROTECTED]> wrote: > Hi, > >> I have been told by our Cisco SE that the 6748 blade will not function >> in blades 1-8, but I wanted to confirm whether that was true. The > > why would they lie to you? you can read from the horses mouth > if you really want to eg > > http://www.cisco.com/univercd/cc/td/doc/solution/dcidg21.pdf > > > page 44 (section 3 - part 4) > > with a nice diagram too > > quote (from cisco document) > > "When a Cisco Catalyst 6513 is used, the dual channel cards, such as the > 6704-4 port 10GigE, the 6708- > 8 port 10GigE, and the 6748-48 port SFP/copper line cards can be placed only > in slots 9 to 13. The single > channel line cards such as the 6724-24 port SFP/copper line cards can be used > in slots 1 to 8. The Sup720 > uses slots 7 and 8, which are single channel 20G fabric attached. In contrast > to the 6513, the 6509 has > fewer available slots but can support dual channel modules in all slots > because each slot has dual > channels to the switch fabric." > > alan > -- Eric Cables _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
