It will NOT work with sup32 in any OS. Even with CFC, there is no
data path to the legacy bus in 67xx cards, only a control path (ie,
headers for central lookups). And of course, there is no xbar on sup32.
Tim
At 09:35 AM 8/29/2008, Leslie Meade observed:
I have a sup32 engine and a ws-x6724-spf blade. I know that it is
not supported in native IOS, but have been told that it will work under CATOS.
Can anyone shed some light on this for me and point me in a direction to look.
I thought it will only work under Sup720's.
Leslie
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
Tim Stevenson, [EMAIL PROTECTED]
Routing & Switching CCIE #5561
Technical Marketing Engineer, Data Center BU
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
