Is it possible to move to CATOS from NATIVE ?
-----Original Message----- From: Gert Doering [mailto:[EMAIL PROTECTED] Sent: Friday, August 29, 2008 10:06 AM To: Leslie Meade Cc: [email protected] Subject: Re: [c-nsp] 6509-E blade question Hi, On Fri, Aug 29, 2008 at 09:35:48AM -0700, Leslie Meade wrote: > I have a sup32 engine and a ws-x6724-spf blade. I know that it is not supported in native IOS, but have been told that it will work under CATOS. > Can anyone shed some light on this for me and point me in a direction to look. > > I thought it will only work under Sup720's. My understanding is that the 67xx blades will only work on a fabric-equipped system, and the Sup32 doesn't have one - so you need a sup720 or rsp720. (This might be wrong, and it might fall back to the shared bus, as all 67xx cards *do* have a bus connector - it's mainly a question of "how useful is a 24 gbit card on a 8 gbit bus" and "will the software support it?"). gert -- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany [EMAIL PROTECTED] fax: +49-89-35655025 [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
