I highly doubt you will find an OID that tells you if a device is router or a switch. For awhile now, Cisco has managed to merge the various functions (bridge, switch, router ..etc) into a single chassis. Your best bet might be to create your own mapping file and use the output of sysDescr.0 to determine which one is which ..
-------------- Original message ---------------------- From: "Lakshminarayanan P" <[EMAIL PROTECTED]> > Hi All, > > > > There is a requirement for me to pick up "device types" of Cisco devices > using SNMP. Could somebody share a OID or direct me to the MIB file that can > help me get this information? > > > > For example, a 2811 polled with this OID should return a value which says > that the device is a "Router". > > > > While I understand that a lot of Cisco modular devices can act as a Switch / > Router / Firewall / Load Balancer based on the modules installed and/or the > IOS running, I just need to get the basic device type. As an example, a > Catalyst 6500 chassis polled with this OID should return something like > "Switch" regardless of the presence of a Firewall Services Module on it. > > > > Is there such an Object? > > > > Thanks in anticipation..... > > Lakshminarayanan > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
