-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Is there not a MIB out there that contains/displays the contents of
what's in the CDP neighbor table, and is this information not in the
table itself... bridge/router/ip-phone/AP/etc.,,?
I thought there was a network-management tool out there somewhere that
used the contents of the CDP table to help map-out the network or
something like that using this technique.
Scott
On Nov 1, 2008, at 2:24 PM, [EMAIL PROTECTED] wrote:
-----Peter Rathlev wrote: -----
On Sat, 2008-11-01 at 11:30 -0400, [EMAIL PROTECTED] wrote:
Especially considering his example was a Catalyst 6500 chassis. He'd
have
to distinguish switched/routed ports present or not...
I'm not a work, so I can't check, but the RFC1213 sysServices
might show
if
the routing and/or bridging functionality is enabled:
<cut>
I was thinking the same, but it doesn't seem very useful when trying
it out. All the units I looked at was either
"INTEGER: 6" (bridge and IP gateway) or
"INTEGER: 78" (bridge, IP gateway, IP host and application host).
<.. snip ..>
Too bad Cisco says what the box *can* do instead of what it's actually
doing.
Maybe RFC1213 ipForwarding would work
ipForwarding OBJECT-TYPE
SYNTAX INTEGER {
forwarding(1), -- acting as a gateway
not-forwarding(2) -- NOT acting as a gateway
}
but I kind of doubt it. We just got some SUP32s in to replace CatOS
SUP2s
(pure L2 switches) & I haven't been able to figure out yet how to
tell them
_not_ to play router. Only the directly connected router can talk
to the
sup32 if it's configured with a default gateway but no default route.
Seems to me that you should only need a default route on something
that's
acting as a router. (If it makes any difference, "no ip proxy-arp"
is the
standard here :) So my guess is that they're going to say they're
acting
as a gateway even tho I don't want them to play router nor is there
anything L3 configured on them beyond the management vlan IP address
and
syslog, tacacs, etc. server addresses.
Lee
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.8 (Darwin)
iEYEARECAAYFAkkNzpcACgkQA7TpMPAlvEcD8gCeKbcepeEmh0tubt0a7D/rDjAg
GHMAn1iNyVdMiPpVwMNz6/v4WmdJTZb+
=5/bp
-----END PGP SIGNATURE-----
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
