Also, make sure the flash was formatted by the chassis its currently in. There was an issue where, if formatted in another chassis, the flash could be read, but not booted from, resulting in a boot to rommon where you have to manually enter the boot command.
--Pete On Tue, Nov 11, 2008 at 1:15 AM, ambedkar <[EMAIL PROTECTED]> wrote: > > Hi, i am using cisco 6509 with two sup engines. sup1 is main and sup2 > is standby. The problem is sup2 is not booting automatically when the > system is switched ON. it is going to rommon mode, where we have to > type boot command so that it will boot. after booting, boot variable > is missing. if we set the boot variable,it will show the boot variable > but it is temporary. > > Again we switched OFF and ON, The same situation is there. i tried > lot, please help me. some details are here... > > Before sup2: > > CAT_1> (enable) sh mod > Mod Slot Ports Module-Type Model Sub > Status > --- ---- ----- ------------------------- ------------------- --- ----- > --- > 1 1 2 1000BaseX Supervisor WS-X6K-S2U-MSFC2 yes ok > 15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok > 3 3 48 10/100BaseTX Ethernet WS-X6348-RJ-45 yes ok > 9 9 8 1000BaseX Ethernet WS-X6408A-GBIC no ok > > > After sup2: > > CAT_1> (enable) sh mod > Mod Slot Ports Module-Type Model Sub > Status > --- ---- ----- ------------------------- ------------------- --- ----- > --- > 1 1 2 1000BaseX Supervisor WS-X6K-S2U-MSFC2 yes ok > 15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok > 2 2 2 1000BaseX Supervisor WS-X6K-S2U-MSFC2 yes > standby > 16 2 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok > 3 3 48 10/100BaseTX Ethernet WS-X6348-RJ-45 yes ok > 9 9 8 1000BaseX Ethernet WS-X6408A-GBIC no ok > > > bye. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
