On (2009-02-13 17:04 -0500), Laurent Geyer wrote: > Still, you cannot define a networking type for a pseudo wire until > mpls encapsulation is enabled.
I'm sorry if yo understood my connect that way, I was simply trying to explain you don't specify it in the xconnect line, but instead use pw-class where you can (also) define interworking. > I just tested what you suggested and the output for `show mpls > l2transport vc 821 detail' is the same whether I use a pseudo wire > class like you suggested, or I simply define encapsulation mpls on the > interface level. Did you configure it on both sides? Configuration is OK now. -- ++ytti _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
