On Fri, 10 Jul 2009 21:04:21 +0400, Antonio Querubin <[email protected]> wrote:
On Fri, 10 Jul 2009, victor wrote:
udp multicact mode to stress-test both even more the cpu utilization on
C7604 became 60% and on C4924 hit 100%. It even became visible as the
responses of the telnet console considerable slowed down.
Both switches work as ip multicast routers in sparse-dense mode. The RP
is C7604. Apparently all the multicast traffic gets process switched,
though
Use sparse mode instead of sparse-dense.
What is your point here? Please, explain. Sparse-dense mode acts as dense
only when RP is unavailable.
Have you enabled either IGMP snooping or CGMP between the routers and
the switches?
Sure I have. IGMP was on by default. Video traffic from IPTV server is
received by end users with no questions.
--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
