Hello all,
I have a vlan that has a primary and secondary ip address. My DHCP
server is in the secondary ip address. The DHCP server is a windows 2003
server with the scope enabled and correct. If I plug a computer into a
switch with the vlan configured I cannot get an address. If I create a DHCP
server in the primary ip address range with the same scope and options and
disable the scope on the other DHCP server it works. I cannot figure out
what is going on.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
