-----Ursprungligt meddelande-----
Från: [email protected]
[mailto:[email protected]] För CJ
Skickat: den 3 november 2009 18:12
Till: [email protected]
Ämne: [c-nsp] Issue with secondary ip address
Hello all,
I have a vlan that has a primary and secondary ip address. My DHCP
server is in the secondary ip address. The DHCP server is a windows 2003
server with the scope enabled and correct. If I plug a computer into a
switch with the vlan configured I cannot get an address. If I create a DHCP
server in the primary ip address range with the same scope and options and
disable the scope on the other DHCP server it works. I cannot figure out
what is going on.
Hi,
You should try to use ip dhcp smart-relay. If you don't get a reply from
primary scope it will ask for the secondary address. See
http://www.cisco.com/en/US/docs/ios/12_1/iproute/command/reference/1rddhcp.h
tml#wp1046084
HTH Daniel
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 4493 (20091009) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
