do you have helper address set? On Tue, Nov 3, 2009 at 9:12 AM, CJ <[email protected]> wrote:
> Hello all, > > I have a vlan that has a primary and secondary ip address. My DHCP > server is in the secondary ip address. The DHCP server is a windows 2003 > server with the scope enabled and correct. If I plug a computer into a > switch with the vlan configured I cannot get an address. If I create a DHCP > server in the primary ip address range with the same scope and options and > disable the scope on the other DHCP server it works. I cannot figure out > what is going on. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
