On Nov 9, 2009, at 2:29 PM, Eric Girard wrote:
Peter,
I'm not familiar with the IBM, but when I deploy the 3x20 for the
HP chassis, I just disable to the Fa0 port to cut it off from the HP
Onboard Administrator, and then proceed to configure it as a
'regular' switch with a management VLAN that comes in on the regular
uplinks to the rest of the network. Hope that helps.
What do you gain from this?
I did that with the first switch but don't anymore. fa0 sits on NMS
along with the OA. Means I don't need to carry the NMS Vlan on the
3x20.
(though I do wish HP/Cisco would integrate the serial console like
HP's done with their own switches)
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
