My 7600 boots ignores the boot statement and goes into ROMMON. >From ROMMON I can boot with following command:
rommon 2 >* boot bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin* rommon 1 > set PS1=rommon ! > LOG_PREFIX_VERSION=1 CONFIG_FILE= SWITCH_NUMBER=0 SLOTCACHE=cards; CRASHINFO=crashinfo_FAILED CV= BOOT=bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin,1; ** config: boot-start-marker boot system flash sup-bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin boot-end-marker 7600#*sh boot* BOOT variable = sup-bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin,1; CONFIG_FILE variable = BOOTLDR variable = Configuration register is 0x2102 Any ideas what could be wrong ? Cheers, ketimun _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
