Config register looks fine. Most obvious thing would be that the bin
file doesn't exist.
What does "dir sup-bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin"
return? Does the file exist?
selamat pagi wrote:
My 7600 boots ignores the boot statement and goes into ROMMON.
From ROMMON I can boot with following command:
rommon 2 >* boot bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin*
rommon 1 > set
PS1=rommon ! >
LOG_PREFIX_VERSION=1
CONFIG_FILE=
SWITCH_NUMBER=0
SLOTCACHE=cards;
CRASHINFO=crashinfo_FAILED
CV=
BOOT=bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin,1;
**
config:
boot-start-marker
boot system flash sup-bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin
boot-end-marker
7600#*sh boot*
BOOT variable = sup-bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin,1;
CONFIG_FILE variable =
BOOTLDR variable =
Configuration register is 0x2102
Any ideas what could be wrong ?
Cheers, ketimun
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
