On Fri, 2009-11-13 at 07:56 +0100, selamat pagi wrote: > My 7600 boots ignores the boot statement and goes into ROMMON. > >From ROMMON I can boot with following command: > > rommon 2 >* boot bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin* > > rommon 1 > set > PS1=rommon ! > > LOG_PREFIX_VERSION=1 > CONFIG_FILE= > SWITCH_NUMBER=0 > SLOTCACHE=cards; > CRASHINFO=crashinfo_FAILED > CV= > BOOT=bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin,1; > > ** > config: > boot-start-marker > boot system flash sup-bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin > boot-end-marker > > 7600#*sh boot* > BOOT variable = sup-bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin,1; > CONFIG_FILE variable = > BOOTLDR variable = > Configuration register is 0x2102 > > Any ideas what could be wrong ?
Try "remote command switch show boot" to see if the sup also has correct boot information. Resetting the boot variable and issuing "copy running-config startup-config" should correct any differences between the two. -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
