Antonio, You should *never* troubleshoot fabric errors with *any* exec-on commands. They run over the fabric that may or may not be compromised.
1. Are any other LCs apart from slot 6 reporting CRC errors? 2. grab two "sh contr fia" from the RP and an attach to all the LCs and send over. Eninja On Mon, Nov 16, 2009 at 4:15 AM, Antonio Soares <[email protected]> wrote: > Hello group, > > I have a 12k reporting this: > > %FABRIC-3-ERR_HANDLE: Reconfigure LC on fabric due to CRC error from slot 6 > > In one week, i have 4 of these messages. > > Slot 6 is a SIP-601 containing 2 x SPA-10G. > > What could be the problem ? > > The "show controllers fia" do not show any problem. > > The "execute-on slot 6 show controllers fia" show this: > > Switch cards present: 0x1F > Switch cards monitored: 0x1F > 0 1 2 3 4 > -------- -------- -------- -------- -------- > los 0 0 0 0 0 > state Off Off Off Off Off > crc16 53989 0 0 0 0 > xor error0 0 0 0 > cell drops1020 1020 1020 1020 > > > IOS=c12kprp-p-mz.120-32.SY6.bin > > > Thanks. > > Regards, > > Antonio Soares, CCIE #18473 (R&S) > [email protected] > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
