Cacti
> -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Adam Greene > Sent: 10 December 2010 15:40 > To: [email protected] > Subject: [c-nsp] bandwidth threshold trap w/o filtering > > Hi, > > I'm trying to get alerted if bandwidth levels rise above a certain % of > interface capacity, on either a 7204VXR or a 2960S. > > On the switch, I see the "storm-control" command is available, but > apparently in addition to generating alerts, the command will cause > traffic to be filtered when the threshold is exceeded. I don't want to > filter traffic, just be alerted. > > Any quick & easy suggestion for how to achieve this? > > Thanks, > Adam > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
