Adam Apparent Networks has a pretty cool solution for this...not sure how you feel about the metrics going to the cloud or using a microappliance. PathView Cloud - www.apparentnetworks.com Cheers Dennis
> From: [email protected] > To: [email protected]; [email protected] > Date: Fri, 10 Dec 2010 15:04:19 -0500 > Subject: Re: [c-nsp] bandwidth threshold trap w/o filtering > > I'm probably the only one here, but I find using RTG to be much easier/better > than Cacti. > > -Drew > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Adam Greene > Sent: Friday, December 10, 2010 10:40 AM > To: [email protected] > Subject: [c-nsp] bandwidth threshold trap w/o filtering > > Hi, > > I'm trying to get alerted if bandwidth levels rise above a certain % of > interface capacity, on either a 7204VXR or a 2960S. > > On the switch, I see the "storm-control" command is available, but > apparently in addition to generating alerts, the command will cause > traffic to be filtered when the threshold is exceeded. I don't want to > filter traffic, just be alerted. > > Any quick & easy suggestion for how to achieve this? > > Thanks, > Adam > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
