Cacti + Threshold plugin' ;-) My 2 cents.
Y. 2010/12/10 Mackinnon, Ian <[email protected]> > Cacti > > > > -----Original Message----- > > From: [email protected] [mailto:cisco-nsp- > > [email protected]] On Behalf Of Adam Greene > > Sent: 10 December 2010 15:40 > > To: [email protected] > > Subject: [c-nsp] bandwidth threshold trap w/o filtering > > > > Hi, > > > > I'm trying to get alerted if bandwidth levels rise above a certain % > of > > interface capacity, on either a 7204VXR or a 2960S. > > > > On the switch, I see the "storm-control" command is available, but > > apparently in addition to generating alerts, the command will cause > > traffic to be filtered when the threshold is exceeded. I don't want to > > filter traffic, just be alerted. > > > > Any quick & easy suggestion for how to achieve this? > > > > Thanks, > > Adam > > > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Youssef BENGELLOUN-ZAHR ……………………………………………… Ingénieur Réseaux et Télécoms Tel. direct +33 (0) 1 77 35 59 14 Tel. portable +33 (0) 6 22 42 63 80 Email [email protected] ……………………………………………………………………………….....www.720.fr _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
