I'm probably the only one here, but I find using RTG to be much easier/better than Cacti.
-Drew -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Adam Greene Sent: Friday, December 10, 2010 10:40 AM To: [email protected] Subject: [c-nsp] bandwidth threshold trap w/o filtering Hi, I'm trying to get alerted if bandwidth levels rise above a certain % of interface capacity, on either a 7204VXR or a 2960S. On the switch, I see the "storm-control" command is available, but apparently in addition to generating alerts, the command will cause traffic to be filtered when the threshold is exceeded. I don't want to filter traffic, just be alerted. Any quick & easy suggestion for how to achieve this? Thanks, Adam _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
