Cat 6500 Sup2 only supports 16 HSRP groups. http://www.cisco.com/en/US/products/hw/switches/ps700/products_qanda_item09186a008011c6bb.shtml#q1
You can reuse the same group on different interfaces, so if you have 1000 interfaces, you could have hsrp group 1 configured on each one of them. Ian On 3/9/11 7:25 AM, Gert Doering wrote: > Hi, > > On Wed, Mar 09, 2011 at 06:56:10AM -0800, Antonie Henning wrote: >>>> Enable HSRP version2 in order to scale past the 256 limitation. >>> On a sup2? >> quote: >> standby version12.2SX This command is supported in the Cisco IOS Release >> 12.2SX >> train. Support in a specific 12.2SX release of this train depends on your >> feature set, platform, and platform hardware. > That's the point... > > It's not in SXF, which is the latest IOS version you can get for Sup2. > > http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/release/notes/features.html > > > says it got implemented in SXI. > > gert > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
