Hi, On Tue, Mar 08, 2011 at 05:55:25PM +1100, Andrew Jones wrote: > Eg. If I have Gi2/1.300 with encapsulation dot1Q 300, I can't have Gi2/2 > with encapsulation dot1Q 300. Is that right?
Always keep in mind that this is a *Switch* with routing intelligence
bolted on. There's only a single global "vlan 300" - but you can have
two different ports in it (gi2/1 and gi2/2 set to "switchport trunk" with
vlan 300 allowed on the trunk).
Subinterfaces are really just a special case of "a trunk port plus the
corresponding 'interface VLAN x' interfaces" (except for MUX-UNI, which
the Sup2 doesn't do) (and except for WAN cards).
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgp3X7ahoxei2.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
