Hmm, darn. Does anyone know if on say a 4948 you can tell it to be GigabitEthernet 1/1 instead of 0/1? I know this is stupid and pointless but it would be a handy feature =D
-Drew -----Original Message----- From: Pete Templin [mailto:[email protected]] Sent: Monday, April 04, 2011 1:21 PM To: Tom Ammon Cc: Drew Weaver; cisco-nsp Subject: Re: [c-nsp] Questions Regarding Cisco 3750 switches On 4/4/2011 11:56 AM, Tom Ammon wrote: > To change the switch number in a 3750, use "switch X renumber Y" where > X is the current switch number, and Y is the one you want it to be (1 > in this case). Use "show switch" to see how it's currently configured. > I don't think this will fix the OP's request. A fresh-out-of-box 3750 will have ports 1/0/N where N is 1-48 and some uplink ports of varying numberings (3750X will have G1/1/N and T1/1/N, for example). Doing 'switch 1 renumber Y' will only change the ports to be Y/0/N, GY/1/N, and TY/1/N. As far as the other question, a 3750X is allowing me to do 'speed auto 10 100', and if I'm at 'speed auto 10' and hit the question mark, I see: 100 Include 100 Mbps in auto-negotiation advertisement 1000 Include 1000 Mbps in auto-negotiation advertisement <cr> I presume that'll do what you wish. I suspect it'll still operate at 1000 if you do 'speed auto 10 100' and the other side sends GE link pulses, but don't know for certain. pt _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
