Oops, read it a little too fast. Sorry :(
On 4/4/2011 11:21 AM, Pete Templin wrote:
On 4/4/2011 11:56 AM, Tom Ammon wrote:
To change the switch number in a 3750, use "switch X renumber Y" where
X is the current switch number, and Y is the one you want it to be (1
in this case). Use "show switch" to see how it's currently configured.
I don't think this will fix the OP's request.
A fresh-out-of-box 3750 will have ports 1/0/N where N is 1-48 and some
uplink ports of varying numberings (3750X will have G1/1/N and T1/1/N,
for example). Doing 'switch 1 renumber Y' will only change the ports to
be Y/0/N, GY/1/N, and TY/1/N.
As far as the other question, a 3750X is allowing me to do 'speed auto
10 100', and if I'm at 'speed auto 10' and hit the question mark, I see:
100 Include 100 Mbps in auto-negotiation advertisement
1000 Include 1000 Mbps in auto-negotiation advertisement
<cr>
I presume that'll do what you wish. I suspect it'll still operate at
1000 if you do 'speed auto 10 100' and the other side sends GE link
pulses, but don't know for certain.
pt
--
---------------------------------------------------
Tom Ammon
Network Engineer
M: (801)674-9273
[email protected]
Center for High Performance Computing
http://www.chpc.utah.edu
-------------------D-------------------------------
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
