On Mon, 4 Apr 2011, Drew Weaver wrote:
First, can you enable auto-negotiate on the 10/100/1000 ports that will
only allow the host to negotiate 10/100 unless you want them to
negotiate 10/100/1000?
Yes.
I believe there is a command in some 10/100/1000 switches that limits
the maximum negotiation speed to 100Mbps or 10Mbps without having to set
the speed/duplex manually.
You can do "speed auto 10 100" per port. If you just use "speed auto",
the port can autonegotiate to 10/100/1000.
Second, is there any way with a switch like this to alter the port number?
instead of GigabitEthernet0/1 it would be GigabitEthernet1/1? I know
this seems trivial but some custom written software for whatever reason
starts counting at 1/1 and goes to 1/48 (probably because it was made
for 6500s)
Most 3750s use the numbering format:
stack_member_number/module/port
In the case of a single (non-stacked) switch, that would give you a port
number like 1/0/48.
I am not aware of any way to alter the port numbers on the 3750(G/E/X).
jms
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
