Apparently these Cisco devices support pseudo wire: Cisco 2650XM, Cisco 2651XM, Cisco 2691, Cisco 3660 Series, Cisco 3725, and Cisco 3745 Routers Cisco 7200 Series Routers Cisco 7500 Series Routers Cisco AS5800 Access Servers and Cisco 10000 Series Routers
~Jay -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mike Sent: Wednesday, May 18, 2011 2:52 PM To: 'Cisco-nsp' Subject: [c-nsp] PWE3 suggestions? Hi all, I have an adtran TA5000 and it's got a 32 port t1 card that does pseudowire. Adtran itself can't seem to give me any usage guidelines or examples using anything for pwe3 other than their own (non-desireable) mx480 product. We want to have a 7200 or something else in the cisco family that can take t1's over pseudowire and route and such but we are having a hard time figuring this out. Is there anyone who has PWE3 experience or can reccomend something in the cisco family we might use here? We don't need gigabits per second, just something we can aggregate subscribers on pseudowire t1's. Thanks. Mike- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
