On 2011-05-19 19:22, Mike wrote:
I did find some cisco documentation but it was quite
> sparse and did not discuss specfic platform support > nor specfic ios images which supported the pseudowire > commands it discussed. I have both a 7204vxr and a 3725
and tried these on both but the cli doesn't understand
> 'pseudowire' or any of the other related things.
A lot of configuration examples are either in IOS generic documentation, or for platform specific docs. Here's an example of doing it on the MWRs, IOS commands are universal to a big extent: http://www.cisco.com/en/US/partner/docs/wireless/mwr_2941_dc/software_config/guide/3_3/Pseudowire.html In summary - for most of the cases with MPLS deployed between PWE nodes you're doing xconnect between source interfaces. If you don't have MPLS between nodes, you're either pushed to pursue L2TPv3 or tunneling MPLS within GRE (scary, but doable and sometimes customers choose that option). -- "There's no sense in being precise when | Łukasz Bromirski you don't know what you're talking | jid:[email protected] about." John von Neumann | http://lukasz.bromirski.net _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
