On 2011-05-18 22:51, Mike wrote:
Hi all,
I have an adtran TA5000 and it's got a 32 port t1 card that does pseudowire.
Adtran itself can't seem to give me any usage guidelines or examples using
anything for pwe3 other than their own (non-desireable) mx480 product. We
want to have a 7200 or something else in the cisco family that can take t1's
over pseudowire and route and such but we are having a hard time figuring
this out. Is there anyone who has PWE3 experience or can reccomend something
in the cisco family we might use here? We don't need gigabits per second,
just something we can aggregate subscribers on pseudowire t1's.
Any decent ISR will do - 2900, 3900 series is your friend coupled with
VWIC3's. 7200 is of course an option given NPE-G1/G2 and appropriate
PAs. Question is scale of T1 ports.
--
"There's no sense in being precise when | Łukasz Bromirski
you don't know what you're talking | jid:[email protected]
about." John von Neumann | http://lukasz.bromirski.net
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
