>
>
>> I may have missed something in your requirements, but why do you need
>> pseudowire at all? Couldn't you simply terminate each customer T1 as a
>> separate routed PPP interface on the TA5000, then backhaul the TA5000 into
>> the rest of your network as "just another aggregation router"?
>>
>
> The TA5000 doesn't work that way, it has no routing or ppp functionality at
> all. The two primary modes are either cross connect two t1's that are
> terminated both on the same chassis (creating a point to point link), or
> shunt a t1 via pseudowire over to some other device in the network for
> processing, presumably another ta5000 or other device in a remote office.
> Its totally protocol agnostic in this regard.
>
> TA5000 has a MLPPP 3 DS3 module, have you tried that?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
