Hi,
Is there a similar command on the 6500s as on the Junipers below:
show interfaces diagnostics optics xe-0/0/8
Physical interface: xe-0/0/8
Laser bias current : 39.304 mA
Laser output power : 0.7050 mW / -1.52 dBm
Module temperature : 41 degrees C / 106 degrees F
Module voltage : 3.2490 V
Receiver signal average optical power : 0.1063 mW / -9.73 dBm
Thanks.
-Mandeep
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
