Thanks guys for the prompt and awesome replies.
> Subject: Re: [c-nsp] optic diag commands on 6500
> To: [email protected]; [email protected];
> [email protected]
> From: [email protected]
> Date: Fri, 10 Jun 2011 19:57:46 +0000
>
> Depending on IOS version and sfp's used, DOM may be useful to you.
>
> Have a look here for compatible sfp's:
> http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_8031.html
>
> #show int trans supported-mod
> #show int trans supported-list
>
> And as others have said:
> #show int giX/X trans
>
> - Ed
> ------Original Message------
> From: Mandeep Singh
> Sender: [email protected]
> To: [email protected]
> Subject: [c-nsp] optic diag commands on 6500
> Sent: Jun 10, 2011 3:27 PM
>
>
> Hi,
> Is there a similar command on the 6500s as on the Junipers below:
>
> show interfaces diagnostics optics xe-0/0/8
> Physical interface: xe-0/0/8
> Laser bias current : 39.304 mA
> Laser output power : 0.7050 mW / -1.52 dBm
> Module temperature : 41 degrees C / 106 degrees F
> Module voltage : 3.2490 V
> Receiver signal average optical power : 0.1063 mW / -9.73 dBm
> Thanks.
> -Mandeep
> _______________________________________________
> cisco-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
