Depending on IOS version and sfp's used, DOM may be useful to you. Have a look here for compatible sfp's: http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_8031.html
#show int trans supported-mod #show int trans supported-list And as others have said: #show int giX/X trans - Ed ------Original Message------ From: Mandeep Singh Sender: [email protected] To: [email protected] Subject: [c-nsp] optic diag commands on 6500 Sent: Jun 10, 2011 3:27 PM Hi, Is there a similar command on the 6500s as on the Junipers below: show interfaces diagnostics optics xe-0/0/8 Physical interface: xe-0/0/8 Laser bias current : 39.304 mA Laser output power : 0.7050 mW / -1.52 dBm Module temperature : 41 degrees C / 106 degrees F Module voltage : 3.2490 V Receiver signal average optical power : 0.1063 mW / -9.73 dBm Thanks. -Mandeep _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
