Yeah you can't put enough memory in those to make software redundancy work. Of course the F version is already EOL and I am guessing we will see the modular version being EOL fairly quickly.
Mack -----Original Message----- From: Mark Tinka [mailto:[email protected]] Sent: Thursday, September 22, 2011 8:29 AM To: Mack McBride Cc: [email protected]; Gert Doering; Christian Kratzer Subject: Re: [c-nsp] ASR-1001 bgp memory usage On Thursday, September 22, 2011 12:38:33 PM Mack McBride wrote: > You have to go for max ram if you use the redundant processes. It > really takes a minimum of 8GB and 16GB recommended. In our case, we're talking about the ASR1002, which is an integrated RP1 with a maximum capability of 4GB of RAM. The RP2 provides more memory, but isn't supported on the ASR1002. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
