On 10/6/2011 12:22 PM, Joseph Mays wrote:
It feels strange to be asking a question about something as simple as a subnet
here, but I'm honestly not sure what's going on in this case. Probably
something simple.
As you can see from the following set of commands, the router is fine with
breaking the following addresses up into /30's, but not fine with the aggregate
of the two routes into a /29.
gw1.armplc(config)#ip route 216.24.2.4 255.255.255.252 216.24.0.54
gw1.armplc(config)#no ip route 216.24.2.4 255.255.255.252 216.24.0.54
gw1.armplc(config)#ip route 216.24.2.8 255.255.255.252 216.24.0.54
gw1.armplc(config)#no ip route 216.24.2.8 255.255.255.252 216.24.0.54
gw1.armplc(config)#ip route 216.24.2.4 255.255.255.248 216.24.0.54
%Inconsistent address and mask
A /29 (.248) has to start on a multiple of 8, so x.x.x.4 255.255.255.248
won't work.
--
Jerry Bacon
Senior Network Engineer
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
