Any news if this would come available for the 2960(S) range of switches. We have about 500 of these and can't afford to replace them all with 3XXX switches just to get IPv6 protection.
Wim Holemans Netwerkdienst Universiteit Antwerpen Network Services University of Antwerp -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Harold Ritter Sent: vrijdag 2 december 2011 13:49 To: Maarten Carels; Cisco Network Service Providers Subject: Re: [c-nsp] ipv6 nd raguard RA Guard, which part of first hop security (FHS) is not currently available on the 3560. It is targeted for Q1 2012. Le 11-12-02 04:19, « Maarten Carels » <[email protected]> a écrit : >Hi list, > >I'm trying to protect the ipv6 part of our net by using the RA-Guard >feature, just line we use dhcp-snooping for ipv4. > >Our 6500 switches recognize 'ipv6 nd raguard' without problems. But our >access switches (we bought a bunch of 3560x switches with LANBase >software) don't. > >I'm wondering if we need IPBase for that. > >--maarten >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
