You can create IPv6 PACLs on 3560/3750 switches that accomplish the same thing. See: http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6553/whitepaper_c11-602135.html (near the bottom is an example).
Whether you can create and apply IPv6 PACLs with LANBase I don't know, you'll have to figure that part out. :) You do need an IPv6-enabled SDM template configured to so however. -- Jason Schmidt Network Engineer UW-Whitewater -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Maarten Carels Sent: Friday, December 02, 2011 3:20 AM To: Cisco Network Service Providers Subject: [c-nsp] ipv6 nd raguard Hi list, I'm trying to protect the ipv6 part of our net by using the RA-Guard feature, just line we use dhcp-snooping for ipv4. Our 6500 switches recognize 'ipv6 nd raguard' without problems. But our access switches (we bought a bunch of 3560x switches with LANBase software) don't. I'm wondering if we need IPBase for that. --maarten _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
