Hi, you won't solve this with IPBase. RA Guard currently is only supported on (certain models and images of) Cat65 and Cat 4500/4948. and from my understanding it won't be supported on much else anywhere soon as "processing of IPv6 in hardware" is needed to implement RA guard "in a reasonable way".
thanks Enno On Fri, Dec 02, 2011 at 10:19:38AM +0100, Maarten Carels wrote: > Hi list, > > I'm trying to protect the ipv6 part of our net by using the RA-Guard feature, > just line we use dhcp-snooping for ipv4. > > Our 6500 switches recognize 'ipv6 nd raguard' without problems. But our > access switches (we bought a bunch of 3560x switches with LANBase software) > don't. > > I'm wondering if we need IPBase for that. > > --maarten > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ -- Enno Rey ERNW GmbH - Breslauer Str. 28 - 69124 Heidelberg - www.ernw.de Tel. +49 6221 480390 - Fax 6221 419008 - Cell +49 174 3082474 PGP FP 055F B3F3 FE9D 71DD C0D5 444E C611 033E 3296 1CC1 Handelsregister Mannheim: HRB 337135 Geschaeftsfuehrer: Enno Rey ======================================================= Blog: www.insinuator.net || Conference: www.troopers.de ======================================================= _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
